Diagram 32/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module, Intake Change-Over Valve, Intake Air Switch-Over Valve, Evaporative Emission Canister Purge Regulator Valve, Electro-Hydraulic Engine Mount Solenoid Valve, Heated Oxygen Sensor behind Three Way Catalytic Converter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Heated Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G131 - Heated Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations

J623 - Engine Control Module (ECM) Control Modules Overview

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve Engine Management Systems Locations

N144 - Left Electro-Hydraulic Engine Mount Solenoid Valve

N145 - Right Electro-Hydraulic Engine Mount Solenoid Valve

N156 - Intake Change-Over Valve Engine Management Systems Locations

N335 - Intake Air Switch-over valve Engine Management Systems Locations

T4r - 4-Pin Connector, black, on Oxygen Sensor 1 behind Three Way Catalytic Converter

T4t - 4-Pin Connector, brown, on Oxygen Sensor 2 behind Three Way Catalytic Converter

T17c - 17-Pin Connector, brown, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T40 - 40-Pin Connector, black, on Engine Control Module

T81 - 81-Pin Connector, black, on Engine Control Module

Z29 - Oxygen Sensor (O2S) Heater 1

Z30 - Oxygen Sensor (O2S) Heater 2

(E7) - Plus connection (87a), in Motronic Multiport Fuel Injection (MFI) wiring harness

(E17) - Wire connection -2-, in Motronic Multiport Fuel Injection (MFI) wiring harness

Previous Diagram 32/10 (Tracks 113-126)

Next Diagram 32/12 (Tracks 141-154)