Emergency Release Operating Mechanism

Emergency Release Operating Mechanism

Removing

• Shift mechanism function unit removed.

- Remove bolts - 1 - and actuator mechanism.





Installing

- To assemble actuator mechanism, insert sliding bracket - 3 - with the tabs - arrows A - into the cut-outs - arrows B - of the cover - 2 -.

- Clip end of Bowden cable - 4 - into sliding bracket and bracket into cover.

- Attach the assembled actuator mechanism to the shift mechanism function unit.

• The flat part - arrow C - faces toward the connecting wires.

Bolt tightening specification - 1 -, refer to => [ Selector Mechanism Overview ] Selector Mechanism Overview