Side Trim, Sill Side

Individual Power Rear Seats

Side Trim, Sill Side





1 Connector

2 Clip

3 Connector

4 Side trim (sill side)

• Removing

- Remove seat pan => [ Seat Pan ]. Seat Pan

- Disengage front trim panel - 8 - at arrow position from side panel on door sill side - 4 -.

- Remove bolts - 5 - (Qty. 3).

- Using a screwdriver, pry out clip - 2 - from side panel on door sill side - 4 -.

- Disconnect connectors - 1 - and - 3 -.

- Pull off side panel on door sill side - 4 - toward rear.

• Installing

- Install side panel on door sill side - 4 - in reverse order of removal.

- Ensure that cable harness - 6 - runs behind the clamping strip - 7 -.

5 Bolts (Qty. 3)

• Tightening torque: 2.5 Nm.

6 Cable harness

7 Retaining strip

8 Front trim panel