Memory Seat on/Off Button, Removing and Installing

Memory Seat ON/OFF Button, Removing And Installing

Removing
- Switch off ignition and remove ignition key.
- Remove front door trim panel.
- Detach insulating mat from door trim.







- Remove bolts - arrows - and remove speaker trim.







- Unplug connector - 1 - .
- Remove bolts - arrows - and detach storage compartment from door trim.







- Use Allen wrench to remove pin - 1 - for actuating storage compartment catch and pin - 2 - for stop.
- Repeat procedure on other side of storage compartment.
- Open storage compartment.







- Remove switch cover panel - 1 - - arrows - .







- Lift rear of switch cover panel - arrow 1 - and detach towards inside of storage compartment - arrow 2 - .
- Unplug connector.







- Release memory seat ON/OFF button on left and right and press to rear out of switch mount in storage compartment - arrow -
- Unplug connector - 1 - .

Installing
Install in reverse order of removal, observing the following:
- Press button into switch mount until fasteners engage.
- Install front door trim panel.