Engine, Securing to Assembly Stand

Engine, Securing on Assembly Stand

Special tools, testers and auxiliary items required

• Tab (2024 A/2)

• Lifting tackle (3033)

• Engine and transmission holder (VAS 6095) with bracket for W12 engine (VAS 6095/1-1)

• Shop crane (VAS 6100)

• Lift arm extension for workshop crane (VAS 6101)

• Bolt M8x20

Procedure

• Engine separated from transmission => [ Engine and Transmission, Separating ] Engine and Transmission, Separating.

- Remove bolt - arrow -.





- Disconnect oil filler tube at cylinder head cover.

- Disconnect electrical connection - 7 - at throttle valve control module 2 (J544).





- Separate vacuum lines - 3 - and - 5 -.

- Pull off hoses - 2 - and - 6 - for the crankcase breather.

- Remove bolts - 1 - and - 4 -.

- Remove left intake manifold side-part.

- Fasten strap (2024 A/2) with bolt M8x20 - arrow - to 20 Nm at right on engine.





- Attach lift arm extension (VAS 6101) to workshop crane (VAS 6100).





- Hook engine sling (3033) onto workshop crane (VAS 6100) with lift arm extension for workshop crane (VAS 6101) as shown in the illustration.

- Lift engine from support elements of scissor lift platform (VAS 6131).

- Remove left engine support from cylinder block.

- Secure engine on the engine and transmission holder (VAS 6095) with adapter set (VAS 6095/1-1) as illustrated.