Climatronic Control Module J255, Coding (Function 07)

Climatronic Control Module J255, Coding

NOTE:
- "Coding" function for Climatronic Control Module J255 is not described in this Workshop Manual. Perform coding using "Guided Fault-Finding" function "Guided Fault-Finding" function of Diagnostic Operation System VAS 5051.
- Coding of Climatronic Control Module J255 is displayed in measured value block (display group "50").
- Rear A/C Control Head (Climatronic) E265 is not encoded at present (vehicle-specific settings are made by way of "Adaptation" function).

Explanation:
Code for Climatronic Control Module J255 is made up of 3 parts, the sum of which forms overall code. Code is based on a two-digit number code, to which certain numerical values have to be added depending on vehicle equipment (e.g. "2" for auxiliary/supplementary heater, "64" for rear roller blind). A routine which considerably facilitates this procedure is stored in Guided Fault-Finding function.