Instrument Panel Lamps and Switches

Instrument Panel Lamps and Switches

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Front Footwell Lamp

• On vehicles with LED footwell lamp, footwell lamp must be completely replaced if LED is malfunctioning.

Removing





- Use flat screwdriver to press in retainer tab - 1 - and lift out footwell lamp - 2 -.

- Disconnect electrical connector - 3 -.

- Remove the bulb (12V, 5 W) from the socket on the rear of the footwell lamp.

Installing

Install in reverse order of removal, observing the following:

- Insert footwell lamp into opening and engage on opposite side.