Left Fuel Delivery Unit With Transfer Fuel Pump (FP) G6, Fuel Level Sensor G and Fuel Level Sensor 3 G237, Component Overview

Left fuel delivery unit with Transfer Fuel Pump (FP) G6, Fuel Level Sensor G and Fuel Level Sensor 3 G237, component overview





1. Support
^ For fuel delivery unit

2. Fuel Level Sensor G
^ Black

3. Left fuel delivery unit
^ With Transfer Fuel Pump (FP) G6
^ Different versions
^ Checking residual pressure

4. Fuel delivery line
^ From suction jet pump, right side

5. Fuel supply line
^ The connection is located on right side of fuel tank
^ To disconnect, press release button on connection piece

6. Fuel return line
^ The connection is located on right side of fuel tank
^ To disconnect, press release tab on connection piece

7. Locking ring
^ Use wrench 3087 to remove and install
^ Fasten to 120 Nm

8. Left locking flange
^ Installed location

9. Oil seal
^ Replace
^ To install, place into opening of fuel tank dry

10. Fuel Level Sensor 3 G237
^ Gray





Installed location of left locking flange
- Insert new, dry seal for locking flange into opening of fuel tank.
- Insert locking flange into fuel tank. Installed location:
- The tab - 2 - on locking flange must lie between tabs - 1 - and - 3 - on fuel tank.