Diagram 33/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Heated Oxygen Sensor (HO2S), Heated Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), Exhaust Flap Valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S) Locations

G130 - Heated Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

J623 - Engine Control Module (ECM) Control Modules Overview

N321 - Exhaust Flap Valve 1 Engine Management Systems Locations

SC8 - Fuse 8 (on fuse panel C) Fuse Overview

T4aa - 4-Pin Connector, black, for Heated Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC)

T6aa - 6-Pin Connector, black, for Heated Oxygen Sensor (HO2S)

T17a - 17-Pin Connector, black, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17c - 17-Pin Connector, brown, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17e - 17-Pin Connector, red, in E-Box plenum chamber

T81 - 81-Pin Connector, black, on Engine Control Module

Z19 - Oxygen Sensor (O2S) Heater

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC))

(B350) - Plus Connection 1 (87a) (in main wiring harness)

(B352) - Plus Connection 3 (87a) (in main wiring harness)

(D181) - Connection 2 (87a) (in engine wiring harness)

(E17) - Connection 2 (in Motronic Multiport Fuel Injection (MFI) wiring harness)

(E28) - Oxygen Sensor (02S) Heater Connection (in Motronic wiring harness)

* - from 03.2007

# - Running change in production

Previous Diagram 33/10 (Tracks 113-126)

Next Diagram 33/12 (Tracks 141-154)