Diagram 33/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Secondary Air Injection (AIR) Pump Relay, Secondary Air Injection (AIR) Pump Motor, Leak Detection Pump (LDP)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J217 - Transmission Control Module (TCM) Control Modules Overview

J299 - Secondary Air Injection (AIR) Pump Relay Overview of Relay Carrier

J518 - Access/Start Control Module Control Modules Overview

J623 - Engine Control Module (ECM) Control Modules Overview

S130 - Secondary Air Injection (AIR) Pump Fuse Fuse Overview

T16c - 16-Pin Connector, black, on Transmission Control Module (TCM) Control Modules Overview

T17a - 17-Pin Connector, black, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17d - 17-Pin Connector, blue, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17e - 17-Pin Connector, red, in E-Box plenum chamber

T81 - 81-Pin Connector, black, on Engine Control Module

V101 - Secondary Air Injection (AIR) Pump Motor Engine Management Systems Locations

V144 - Leak Detection Pump (LDP) Locations

(44) - Ground Connection (on left lower A-pillar) Ground Connections In Passenger Compartment

(375) - Ground Connection 10 (in main wiring harness)

(D107) - Connection 5 (in engine compartment wiring harness)

* - Relay Panel in E-Box plenum chamber

# - through m.y. 2005

## - from m.y. 2006

Previous Diagram 33/13 (Tracks 155-168)

Next Diagram 33/15 (Tracks 183-196)