Diagram 33/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module 2, Throttle Valve Control Module 2, Evaporative Emission (EVAP) Canister Purge Regulator Valve 2, Heated Oxygen Sensor 3, Oxygen Sensor 3 Behind Three Way Catalytic Converter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G296 - Throttle Drive 2 Engine Management Systems Locations

G297 - Throttle Drive Angle Sensor 1 Engine Management Systems Locations

G298 - Throttle Drive Angle Sensor 2 Engine Management Systems Locations

G285 - Heated Oxygen Sensor 3 Locations

G287 - Oxygen Sensor 3 Behind Three Way Catalytic Converter Locations

J544 - Throttle Valve Control Module 2 Engine Management Systems Locations

J624 - Engine Control Module 2 Engine Control Module

N333 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 2 Engine Management Systems Locations

T4ac - 4-Pin Connector, green, for Oxygen Sensor 3 Behind Three Way Catalytic Converter

T6ac - 6-Pin Connector, black, for Heated Oxygen Sensor 3

T40a - 40-Pin Connector, black, on Engine Control Module 2

T81a - 81-Pin Connector, black, on Engine Control Module 2

Z62 - Oxygen Sensor (O2S) Heater 3

Z64 - Oxygen Sensor (O2S) Heater 3 (behind Three Way Catalytic Converter (TWC))

* - from 03.2007

Previous Diagram 33/20 (Tracks 253-266)

Next Diagram 33/22 (Tracks 281-294)