Driver-Side Electronics Box, Removing and Installing

Driver-side Electronics Box, Removing And Installing

- Component location: On floor of vehicle beneath drivers seat

Removing
- Remove drivers seat
- Switch off ignition and remove ignition key.
- Remove lower A-pillar trim.
- Fold back floor carpet.







- Release cover for drivers side electronics box - arrows - and fold to side.







- Remove control modules - 1 - out of drivers side electronics box - 2 - .
- Take out electronics box.

NOTE: Check exact assignment for driver side electronics box in current wiring diagram .

Installing
Install in reverse order of removal, observing the following:
- Install lower A-pillar trim.
- Install drivers seat