Battery Switch-Off Relay J655, Removing and Installing

Battery Switch-off Relay J655, Removing And Installing







Removing
- With ignition switched off, disconnect ground cable at battery
- Remove right luggage compartment side trim cover - arrows - .







- Remove covers - 1 - and - 2 - over battery.







- Disconnect ground cable - 2 - and positive cable - 3 - at battery.
- Release catch - 1 - and open flap over battery disconnector.







- Remove nuts at positive cables - 1 - and - 2 - .
- Release retainer tab and take connector - 4 - out of holder.
- Unplug connector.
- Release retainer tabs - arrows - and take battery cut-off relay - 3 - out of mount.

Installing
Install in reverse order of removal, observing the following:
- Connect battery. Actions to be taken: .

Tightening torque

Component Nm
Positive cables to battery cut-off relay 22