Front Final Drive Overview

Front Final Drive Overview

• Automatic transmission clean working conditions, refer to => [ Clean Working Conditions ] Clean Working Conditions.

• General repair instructions, refer to => [ General Repair Information ] General Repair Information.






1 Shaft Seal

• Between the final drive and the transmission housing

• Removing and Installing, refer to => [ Final Drive/Transmission Housing Shaft Seal ] Final Drive/Transmission Housing Shaft Seal

2 Adjusting Shim

• Behind the taper roller bearing outer race

3 Taper Roller Bearing Outer Race

4 O-ring

• Replace

5 Plug

• 35 Nm

• Replace

6 Right Flange Shaft

• Removing and installing, refer to => [ Right Flange Shaft ] Right Flange Shaft

7 Locking Ring

• Replace

8 Right Flange Shaft Seal

• Removing and Installing, refer to => [ Right Flange Shaft Seal ] Right Flange Shaft Seal

9 Bolt

• 23 Nm

• Follow the tightening sequence, refer to => [ Final Drive Cover O-Ring ] Final Drive Cover O-Ring.

10 Final Drive Cover

11 Adjusting Shim

• Behind the taper roller bearing outer race

12 Taper Roller Bearing Outer Race

13 Final Drive Cover O-ring

• Removing and Installing, refer to => [ Final Drive Cover O-Ring ] Final Drive Cover O-Ring

14 Differential

15 Spring Pin

16 Selector Shaft Lever

17 Selector Shaft Seal

• Removing and Installing, refer to => [ Selector Shaft Seal ] Selector Shaft Seal

18 Bolt

• 23 Nm

19 Left Flange Shaft

• Removing and installing, refer to => [ Left Flange Shaft ] Left Flange Shaft