01J, Continuously Variable Transmission (CVT)

Diagnostic Trouble Code (DTC) table

Note:
^ In the following list all the possible DTC's are shown in ascending order. These DTC's can be recognized by the Transmission Control Module(TCM) -J217-. Then they are displayed on the VAS 5051 Vehicle Diagnosis, Measurement and Information System VAS 5051 or on the V.A.G 1551 scan tool during reading of the DTC memory content.
^ If DTC's occur only occasionally or if the DTC memory was not deleted after the malfunction was corrected, these DTC's will be displayed for a predetermined time as "intermittently occurring DTC's; Refer to Transmission Control Module (TCM) DTC Recognition.
^ If faulty components are displayed when the DTC memory is read, make an additional check of wiring connections to the components for short or open circuits.