Head Restraint Cover and Padding (Release Button), Removing and Installing

Head Restraint Cover And Padding (release Button), Removing And Installing







- Remove head restraint.

Removing
- Using a screwdriver, pry out fastening strip - 2 - from guide channel - 1 -.







- Using a screwdriver, lift cover fabric over trim for release button - 3 -.
- Remove head restraint mount - 1 - from padding/cover - 2 -, starting on the side opposite release button - 3 -.
- Remove padding - 2 - from cover - 3 -.

Installing
- Insert padding - 2 - in cover - 3 -, making sure it is correctly aligned.







- Push head restraint mount - 1 - into padding/cover - 2 -, starting on the side with the release button.
- Press fastening strips firmly into guide channel (pull to check).