With Manufacturer's Scan Tool

Check DTC Memory (function 02)

Note: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.

- Initiate On Board Diagnostic (OBD) of automatic vertical headlight aim control, Initiating


Display on VAS5051:







- In selection -1-, click on the diagnostic function "02 - Check DTC Memory".


Display on VAS5051:







1 - DTC memory content:
- 0 malfunctions recognized
or
- X malfunctions recognized
2 - Diagnostic Trouble Code (DTC)
- DTC
- malfunction location
- malfunction type

If malfunctions were recognized:
- Print out Screen content or On Board Diagnostic (OBD) protocol: - Click on <- button


Display on VAS5051:







- Repair malfunction(s) according to DTC table, Automatic Headlight Aim Control .
- In selection, click on diagnostic function "02 - Check DTC Memory" again and Erase DTC Memory Erase DTC Memory (Scan Tool Function 05)
- In selection, click on diagnostic function "06 - End Output" End Output (Function 06)

If no malfunction was recognized:
- In selection -1-, click on diagnostic function "06 - End Output" End Output (Function 06)