Indicator Lamp For Level Control System -K134-

Indicator lamp for level control system -K134-





The malfunction may have the following causes if the self leveling suspension system indicator light K1 34 does not go out when the ignition is switched on and the check routine has been completed:
^ Voltage below 10 V
^ Malfunction in the self leveling suspension system, Check DTC Memory
^ Instrument cluster malfunctioning
^ The indicator light flashes at around 1 Hz if the vehicle is in an extreme low or extreme high level position at ignition.

On Board Diagnostic (OBD) system, function
Check preconditions:
^ Power supply and fuses for the particular system O.K.
=> Electrical Wiring Diagrams
^ Connect scan tool VAG 1551
^ Switch on ignition

Note:
^ Malfunctions which occur only for a short time are indicated as "sporadically occurring malfunctions by means of "ISP" on the right in the display.
^ Additional instruction for use can be checked using the HELP button on the VAG1551.
^ The (arrow) button is used to move one step further in the program sequence.

^ Activate printer using the PRINT button (indicator light in the button illuminates).
^ Press Button 1 for "Rapid data transfer".





Display:
Address word for the self leveling suspension system: 34
^ Press Buttons -3- and -4-.





Display:
^ Confirm the entry using the Q button.





Display:
^ The following appears on the display after 5 sec:
^ Press the (arrow) button.





Display:

Note: An overview of Me possible functions is printed out after pressing of the HELP button.