Diagram 69/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module (ECM) Power Supply Relay, Coolant FC (Fan Control) Control Module 2, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

J220 - Motronic Engine Control Module (ECM) Common Modules Overview

J271 - Motronic Engine Control Module (ECM) Power Supply Relay Locations

J671 - Coolant FC (Fan Control) Control Module 2 Locations

S4 - Fuse

S42 - Coolant Fan Fuse

S88 - Fuse Strip

T2p - Double Connector, on Coolant FC (Fan Control) Control Module

T6o - 6-Pin Connector, on Coolant FC (Fan Control) Control Module

T10d - 10-Pin Connector, grey, connector station A-pillar, left Connector Station

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber Connector Station

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber Connector Station

V177 - Coolant Fan 2 Locations

V284 - Coolant Fan 3

(11) - Ground connection, in battery box Locations

(26) - Ground connection, on front apron Locations

(500) - Threaded connection -1- (30) on the relay plate

(D50) - plus connection (30), in engine compartment wiring harness

* - Coolant Fan, 300 W

** - Coolant Fan, 100 W, hot climates only

Next Diagram 69/3 (Tracks 15-28)