Hose Plan, EVAP Canister System / Leak Detection System

Hose Plan, EVAP Canister System / Leak Detection System







1. Throttle Valve Control Module -J338-
2. Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Component location: Front right in engine compartment
3. Vent line
- From EVAP canister to Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Installation position: Right side, beneath vehicle floor
- Secured to fuel tank in fuel tank area.
4. Vent line
- To gravity valve on fuel tank
5. EVAP canister
- Component location: Bottom of spare tire well
6. Connection hose
- Leak Detection Pump (LDP)/EVAP canister
- Pressure side
7. Air filter
- For Leak Detection Pump (LDP) -V144-
8. Leak Detection Pump (LDP) -V144-
- Component location: Under wheel housing liner in rear left wheelhousing
9. Vacuum line
- To Leak Detection Pump (LDP) -V144-.