EVAP Canister, Removing and Installing

EVAP Canister, Removing And Installing

Removing
- Remove cover from Evaporative Emission (EVAP) canister at bottom of spare wheel well.







- Remove hose connections -1- to -3- at vent lines.
- Remove sealing pieces above vent lines.
- Remove pin bolts -arrows- and remove EVAP canister.

Installing
Installation is in reverse order of removal, note the following:

NOTE: Secure all hose connections using hose clamps appropriate for the model type.

Tightening torques

Component Nm
EVAP canister to chassis 15
Cover for EVAP canister 10