Fuel Level Sensor G, Removing and Installing - From 11.04

Fuel Level Sensor G, Removing And Installing







Removing
Observe safety precautions
Observe rules for cleanliness.
- Remove fuel delivery unit.
- Release retaining tabs - arrows - with a screwdriver and pull Fuel Level Sensor G upward and out.







- Disengage electrical connectors - 1 - and - 2 - and disconnect them.

Installing
Installation is in reverse order of removal. Note the following:
- Connect electrical connections - 1 - and - 2 - and check that they are securely engaged.
- Insert Fuel Level Sensor G in the guides on fuel delivery unit and push down until it engages.
- Install fuel delivery unit, observing notes for connecting battery.