Coolant Fan 2 -V177- (Right), Removing and Installing

Coolant Fan 2 -V177- (right), removing and installing

Removing

Note: All cable ties opened or cut during repairs must be reinstalled at the same locations.

- Bring lock carrier into service position [1][2]Procedures





Disconnect electrical harness connector - arrow -.
Move coolant fan wiring harness clear.





- Remove bolt - 1 -.
- Turn coolant fan in direction of - arrow - and remove it.

Installing
Installation is performed in reverse order of removal. Note the following:

Note: During installation, reinstall all cable ties at the same locations.

- Install lock carrier with attachments. [1][2]Procedures





- Place torque support on rubber buffer for torque support and tighten bolts - arrows -.
- Install front bumper cover.
- Check headlight adjustment.