Gear Shift Knob With Boot, Removing and Installing

Gear shift knob with boot, removing and installing, 0A3, 6 Spd. M/T AWD

Special tools, testers and auxiliary items required

Hose clip pliers VAG 1275:

Note:
^ The gear lever knob is removed together with the gear lever boot and the cover for the center console.





Removing
- Open ashtray.
- Unclip cover for center console and lift it off - arrows -.





Gear shift knob with clip:
- Pull boot up and over gear lever knob.
- Open clip - arrow - and pull off gear lever knob together with boot.





Gear shift knob with locking mechanism:
- Release connecting piece - 1 - in direction of - arrow - and pull gear lever knob off upwards together with gear lever boot.

Installing
Perform installation in reverse sequence of removal.