Programming and Relearning
Airbag Control Module, Coding
NOTE:
- The control module as supplied is not coded.
- The airbag warning lamp will light if the control module is not coded.
- Coding is performed using the VAG 1551 Scan Tool.
If the correct code is not shown on the VAG 1551 or the control module has been replaced, code the control module as follows:
Performing function 07 - "Code control module"
Indicated on display
Rapid data transfer HELP
Select function XX
- Press keys 0 and 7.
Indicated on display
Rapid data transfer Q
07 - Code control module
- Confirm input with Q key.
Indicated on display
Code control module
Enter code number XXXXX (0-32000)
- Enter the Airbag Control Module code number from the keypad:
Codes up to model year 2001
- 10102: Vehicles with front airbags, front side airbags and front belt tensioners, with key switch to disable passenger airbag
- 10102: Vehicles with front airbags, front side airbags and front belt tensioners, without key switch to disable passenger airbag
- 10103: Vehicles with front airbags, front side airbags and front belt tensioners with key switch to disable passenger airbag and belt buckle check.
- 00103: Vehicles with front airbags, front side airbags and front belt tensioners and belt-buckle check, without key switch to disable passenger airbag.
Code table for Airbag Control Module from model year 2002:
Indicated on display
Code control module Q
Enter code number 10102 (0-32000)
- Confirm input with -Q- button.
- The control module identification and the code number entered (10102) are shown on the display.
The display will show the control module identification together with the coding which has been entered (00102).
8N8909601 Airbag Front+Side 0004 ->
Coding 00102 WSC 06812
NOTE:
- Code 10102 can be entered only with control module number "8N8909601".
- Meaning of display.
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6- for the function "End output."
Indicated on display
Rapid data transfer Q
06 End output
- Confirm input with -Q- button.
Indicated on display
Rapid data transfer HELP
Enter address word XX