Camshaft Bearing

Camshaft Bearing Cap

Torque 5 Nm + 45 degrees (1/8 turn)











Install intake camshaft as follows:

Tighten bearing caps 5 and 9 alternately in a diagonal sequence and then tighten to final torque.

Tighten bearing caps 1 and 13.

Tighten bearing cap 7.

Tighten bearing caps 3 and 11.

Install exhaust camshaft as follows:

Tighten bearing caps 6 and 10 alternately in a diagonal sequence and then tighten to final torque.

Tighten bearing caps 2 and 14.

Tighten bearing cap 8.

Tighten bearing caps 4 and 12.