Rear Suspension (AWD)

Rear axle, assembly overview

Note:
^ Always replace self-locking nuts/bolts.
^ Always replace corroded nuts/bolts.





1 - Subframe

2 - Final drive

3 - Cross member

4 - Stabilizer bar
^ If necessary, repair paint damage and apply corrosion protection coating

5 - Gas-filled strut
^ The same version must be installed on both sides

6 - Wheel bearing

7 - Trailing arm

8 - Transverse link
^ The same version must be installed on both sides

9 - Coil spring

10 - Drive shaft

11 - Twelve-point bolt, 60 Nm