Convertible Top, Adjusting Gaps and Positioning Dimensions

Convertible Top, Adjusting Gaps And Positioning Dimensions







1 - Convertible top
- Dimension - a - = 35 mm ± 10 mm.
- This is the so-called "jump gap" for the convertible top.
- When the convertible top is opened, it must jump up approx. 35 mm.
- At this dimension, the forces required to close the convertible top are acceptable.
- Roof inset, dimension - c - = 1 mm ± 1 mm







2 - Seal for front roof frame
- Dimension - b - = 9 mm + 2 mm.
3 - Window
- Window must only rise up to bulge (arrow) in seal - I -.
4 - Seal - I -
- Seals can be adjusted to specified positions from the side using shims.
5 - Tensioning strut
6 - Seal for tensioning strut
- Dimension - d - = 15 mm ± 2 mm