Toe Setting at Rear Wheels, Centering

Toe setting at rear wheels, centering (Front Wheel Drive (FWD) vehicles)

The total toe setting at the rear wheels cannot be adjusted.
The individual toe values can be centered by moving the rear axle.

- Loosen bolts at mounting brackets.
- Centered individual toe values by moving axle beam in elongated holes at mounting brackets.

If the total toe setting is outside the permitted tolerance, or if it is not possible to center the individual settings, the axle beam must be checked for damage and replaced if necessary.
It may also be necessary to check the body dimensions/alignment at the rear axle mounting points and repair as required Body Collision Repair