Fuel Pump and Fuel Level Sensor -G-, Component Overview

Fuel Pump And Fuel Level Sensor -G-, Component Overview







1 - Fuel pump
- Check Fuel Pump (FP) electrically
- Checking residual pressure:
2 - Seal
- Always replace
- To install, place into opening of fuel tank when dry.
3 - Return line
- Blue
- From fuel rail
- Attaches to connection with "R " marking at connector flange
- To remove connector flange, press release button on connecting piece
4 - Supply line
- Black
- To fuel filter
- Attaches to connection with "V.marking at connector flange
- To remove from connector flange or from filter, press release button on connecting piece.
5 - 4-pin harness connector
- For Fuel Pump (FP) and Fuel level sensor -G-
6 - Union nut, 80 Nm
- Use ring nut spanner 3217 to remove and install
7 - Fuel level sensor -G-
- Checking resistance values