Rules of Cleanliness

Rules Of Cleanliness

When working on the fuel supply and/or injection system, pay careful attention to the following points:
- Thoroughly clean all connections and the surrounding area before disconnecting.
- Place parts that have been removed on a clean surface and cover. Do not use fluffy cloths.
- Carefully cover opened compartments or seal, if the repair cannot be carried out immediately.
- Only install clean components: Only unpack replacement parts immediately prior to installation. Do not use parts that have been stored loose (in tool boxes etc.)
- When the system is open: Do not work with compressed air if it can be avoided. Do not move vehicle unless absolutely necessary.