Diagram 74/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Intake Air Temperature (IAT) Sensor, Engine Coolant Level (ECL) Sensor, Manifold Absolute Pressure (MAP) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G42 - Intake Air Temperature (IAT) Sensor Locations

G62 - Engine Coolant Level (ECL) Sensor Locations

G186 - Throttle Drive (for Electronic Power Control (EPC))

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC))

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC))

G336 - Intake Manifold Runner Position Sensor Locations

G410 - Low Fuel Pressure Sensor 2.0L BPY

J220 - Motronic Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

J338 - Throttle Valve Control Module Locations

T6d - 6-Pin Connector, black, near throttle valve control module

T60 - 60-Pin Connector, black (Connector A)

V157 - Intake Flap Motor Locations

(220) - Sensor Ground Connection (in engine wiring harness)

(D103) - Connection 3 (in engine compartment wiring harness)

* - G42 replace G299

Previous Diagram 74/12 (Tracks 141-154)

Next Diagram 74/14 (Tracks 169-182)