Diagram 102/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Data Bus On Board Diagnostic Interface, Comfort System CAN-Bus





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J386 - Driver's Door Control Module Control Modules in Interior Of Vehicle

J519 - Vehicle Electrical System Control Module Control Modules in Interior Of Vehicle

J527 - Steering Column Electronic Systems Control Module Control Modules in Interior Of Vehicle

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior Of Vehicle

K133 - Central Locking -SAFE- Indicator Lamp

T2c - Double Connector, black, behind driver's door trim

T8d - 8-Pin Connector, black, behind center console

T10a - 10-Pin Connector, black, behind glove compartment

T12e - 12-Pin Connector, black (Connector G)

T20 - 20-Pin Connector, black, door A-pillar, left

T20b - 20-Pin Connector, black (Connector A)

T20d - 20-Pin Connector, yellow (Connector A)

T20f - 20-Pin Connector, black (Connector A)

T32a - 32-Pin Connector, grey (Connector C)

(369) - Ground Connection 4 (in main wiring harness)

(372) - Ground Connection 7 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

# - Not applicable from November 2005

## - Applicable from November 2005

Previous Diagram 102/8 (Tracks 85-98)

Next Diagram 102/10 (Tracks 113-126)