Notes For Repairs on CAN-Bus Wires

Notes For Repairs On CAN-Bus Wires







- Use an unshielded two-wire line -1- and -2- (cross-section 0.35 sq.mm or 0.5 sq.mm) as CAN-Bus bus wire.
- color coding of CAN-Bus bus wires:

Drive CAN-Bus High orange/black
Convenience CAN-Bus High orange/green
Infotainment CAN-Bus High orange/violet
CAN-Bus Low (all) orange/brown

- Only use yellow wires for repairs to wiring. Mark location of repair with yellow insulating tape.
- Both bus wires must be of the same length when repairing. When twisting the wires -1- and -2-, length of twist -A- = 20 mm must be attained.
- When making repairs, there must be no untwisted section of wire which is longer than -B- = 50 mm, e.g. in the vicinity of heat-shrink sleeves -arrow-.