Crankshaft, Cylinder Block - Fastener Tightening Specifications

Fastener Tightening Specifications






Accessory Assembly Bracket Tightening Sequence

- Install bolts - 1 through 6 - and tighten by hand.






- Tighten bolts - 1 through 6 - to 40 Nm.

Tightening Sequence of Front Sealing Flange

- 1. Install bolts - 1 to 10 - and tighten by hand.






- 2. Tighten the bolts - 1 to 6 - in a diagonal sequence in stages to 15 Nm.

- 3. Tighten bolts - 7 to 10 - to 15 Nm.

Rear Tightening Sequence

- 1. Install bolts - 1 to 8 - and tighten by hand.






- 2. Tighten the bolts - 1 to 6 - in a diagonal sequence in stages to 15 Nm.

- 3. Tighten bolts - 7 to 8 - to 15 Nm.