Ribbed Belt Pulley With Freewheel

Ribbed Belt Pulley with Freewheel

Special tools, testers and auxiliary items required

• Multi-point Adapter (3400)

• 8 mm hex socket or TORX T50

Removal






- Remove the generator.

- If present, press the protective cap off the generator pulley.

- Counter-hold pulley using (3400) and rotate generator shaft clockwise to loosen it.

Installation

Install in reverse order of removal. Note the following:

- Turn the generator shaft counterclockwise to tighten.

- Clip protective cap onto generator pulley.

Tightening Specifications