Diagram 15/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

G131 - Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor 2 After Converter -G131- / Heater For Oxygen Sensor 2 After Converter -Z30-

J220 - Motronic Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

SB12 - Fuse 12 (on fuse panel B) Overview Of Fuses

T4b - 4-Pin Connector, black, on oxygen sensor (O2S) behind three way catalytic converter (TWC)

T4f - 4-Pin Connector, brown, on oxygen sensor (O2S) 2 behind three way catalytic converter (TWC)

T26 - 26-Pin Connector, black, on electronics box engine compartment (Connector K)

T121 - 121-Pin Connector, black, on engine control module (ECM)

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

Z30 - Oxygen Sensor (O2S) Heater 2 (behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor 2 After Converter -G131- / Heater For Oxygen Sensor 2 After Converter -Z30-

(D113) - Connection 11 (in engine compartment wiring harness)

Previous Diagram 15/17 (Tracks 211-224)

Next Diagram 15/19 (Tracks 239-252)