Generic Scan Tool Manual Contents

Generic Scan Tool Manual Contents

Included in the contents of this Generic Scan Tool (GST) manual is a summary table of the vehicle specific OBD II Emission Related Engine and Transmission DTC's. This table contains all necessary Malfunction Criteria, Threshold Values, Secondary Parameters, Enabling Conditions, Monitoring Time Length, Frequency of Checks, and Mil. Illumination to accurately monitor and diagnose the Engine Emissions and Transmission and perform all functions required to run Modes 01 through 09 with a hand held scan tool. For a further description of the monitor strategies, a document reference has been provided throughout this Generic Scan Tool (GST) manual and can be easily identified as. e.g. => Bosch Motronic MED 7.1.1 OBD System Strategy.

This Generic Scan Tool (GST) manual also contains the step by step pin point test procedures to accurately diagnose and repair the suspected component or system once a DTC has been set. All references to repair procedures and wiring diagrams will be found within the diagnostic test procedure and easily identified as. e.g. Check the Mass Air Flow (MAF) Sensor (G70). Refer to => [ Mass Air Flow Sensor, Checking ] Motronic Fuel Injection System.