Diagram 86/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Fuse (on fuse panel), All-Wheel Drive Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch Locations

G437 - Oil Pressure/Temperature Sensor Rear Final Drive 02D And 0AV

J104 - ABS Control Module Control Modules in Front Part Of Vehicle

J492 - All-Wheel Drive Control Module Overview Of Control Modules

J519 - Vehicle Electrical System Control Module Control Modules in Interior Of Vehicle

SC9 - Fuse 9 (on fuse panel) Overview Of Fuses

T2ax - Double Connector, near all-wheel drive control module

T6q - 6-Pin Connector, black, near fuel level sensor 2

T8y - 8-Pin Connector, black (Connector A)

T16a - 16-Pin Connector, black (Connector E)

V181 - Haldex Clutch Pump Rear Final Drive 02D And 0AV

V184 - Oil Pressure Actuator Rear Final Drive 02D And 0AV

(61) - Ground Connection (on left C-pillar) Overview Of Ground Connections in Rear Part Of Vehicle (3-door Models)

(371) - Ground Connection 6 (in main wiring harness)

(B335) - Connection 1 (54) (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

* - Only models with anti-lock brake system (ABS) MK60 and automatic transmission (09G)

** - Only models with anti-lock brake system (ABS) MK60 and direct shift gearbox (02E) or manual transmission

Previous Diagram 86/2 (Tracks 1-14)