Manual Entry Assistance Handle

Front Seats

• From 06.2006, the usual wiring harness routing to connector station under front seat. Refer to => [ Connectors, Disconnecting ] Front Seats has been replaced with modular wiring routing => [ Modular Wiring Routing Assembly Overview, from June 2006 ] Front Seats.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular. Refer to => [ Modular Wiring Routing Versions ] Front Seats.

Manual Entry Assistance Handle

Removing

- Push the handle - 1 - upward.





- Pry the tab - 3 - out of the metal pin - 2 - with a screwdriver and at the same time, remove the handle - 1 -.

Installing

• In order to be able to press the handle in, the metal pin in the rosette opening must be pushed upward.