Fan Shroud: Service and Repair

Fan Shroud

Removing

- Bring lock carrier into service position. Refer to => [ Lock Carrier, Moving into Service Position ] Lock Carrier, Moving Into Service Position.

- Disconnect connectors - 1 - and - 2 -.





- Free up electrical wiring.

- Disconnect connector - 1 - for the hood lock and free up the electrical wires.





- Remove bolts - arrows - and remove fan shroud upward and out.

Installing

Installation is in reverse order of removal, note the following:

- Install lock carrier with attachments. Refer to =>
Radiator Support Radiator Support





- Place the torque support stop on the rubber buffer and tighten the nuts - arrows -.

- Install front bumper cover.

- Check headlamp adjustment.

Tightening Specifications