Air Cleaner Housing: Service and Repair

Air Filter Housing

1.8L Turbo

Procedure





- Remove screws - arrows -.

- Disengage Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) - item 1 - at air duct.

- Remove air duct - 2 -.

- Disconnect electrical connectors:





1. at Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)

2. at Mass Air Flow (MAF) sensor (G70)

3. at Wastegate Bypass Regulator Valve (N75)

- Remove the hoses - 4 to 7 -.

- Remove hose to Secondary Air Injection (AIR) pump.

- Free up wiring.

- Remove air filter housing - 8 -.

- Remove air filter.

• Vacuum hose to Secondary Air Injection (AIR) combi-valve is clipped to bottom side of air intake hose.

Install in reverse order.