HID Headlamps

High-Intensity Gas Discharge Lamp Control Module, through MY 2006

CAUTION!
Danger to life due to high voltage.

• Usage and safety information for gas discharge headlamps. Refer to => Lighting and Horns

Removing





- With ignition switched off, disconnect battery Ground (GND) wire .

- Remove headlamp.

- Remove the screws - arrows - and remove retaining bracket - 2 -.

- Remove control module - 1 - for the gas discharge lamp from headlamp housing and disconnect the connectors.

Installing

Install in reverse order of removal, observing the following:

- Check seal between High-intensity Gas Discharge Lamp Control Module and headlamp housing.

- Install headlamp.

- Connect battery.

Tightening Specifications