Charge Air Cooler Component Overview

Charge Air Cooler Component Overview





1 Air duct

• For charge air cooler

2 Air guide hose

• To lock carrier and to turbocharger

• Must be free of oil and grease when installing

3 Hose clamp (reinforced) - 5.5 Nm

4 Air guide hose

• To Intake manifold

• Must be free of oil and grease when installing

5 Not installed

6 O-ring

• Replace

7 Charge Air Pressure Sensor (G31) / Intake Air Temperature (IAT) Sensor (G42)

• Removing and installing, refer to => [ Charge Air Pressure Sensor and Intake Air Temperature Sensor ] Service and Repair

8 5 Nm

9 Mountings

10 Bracket for charge air cooler

11 Rubber grommet

12 22 Nm

13 Air charge cooler

• Removing and installing, refer to => [ Charge Air Cooler ] Charge Air Cooler

14 Bracket for refrigerant line

15 5 Nm