Front Door Window Glass: Adjustments

Door Window, Adjusting

Special tools, testers and auxiliary items required

• Masking tape

Window immersion depth, determining





• Close convertible top.

- Raise window.

- Tape masking tape - arrows - overlapping on window with door open.

- Close door completely.

• Dimension - a - = 80 mm.

• Dimension - b - = 40 mm.

• Raise convertible top fabric - 1 - in place.





- Apply a marking - arrow - to making tape at front and back directly below roof frame seal.

- Open door.

- Measure distance between marking and upper end of window.

• Front immersion depth: max. 5 mm.

• Rear immersion depth: max. 7 mm.

Window immersion depth, adjusting





- Lower window.

- Remove front and rear rubber stops - arrow - at bottom of door.

- Insert a thin 5 mm hex socket head wrench through opening on door.

• The windows can be roughly adjusted by loosening screws => [ (Item 2) Clamping brackets ] Door Window Assembly Overview and => [ (Item 3) Locking screw ] Door Window Assembly Overview.

• Door seal - 1 - does not need to be removed to insert hex socket head wrench.

- Adjust front and rear window immersion depth by evenly turning both lifting units.

• Turn right = greater immersion depth.

• 1 turn corresponds to approx. 1.2 mm.

- Seal off openings with rubber plugs.

- Raise window and measure change.

- Ensure window is parallel to side window, adjust if necessary.