Insulation Compartment, Removing and Installing

Insulation Compartment, Removing And Installing







1 - Cold air hose
2 - Glove compartment
3 - Bolts (3x)
- Tightening torque 0.6 Nm
4 - Insulation box
- Removing
- Remove vent - 5 -.
- Remove bolts - 3 - (3x) and carefully pull insulation box out off glove compartment - 2 -.

NOTE: Install cold air hose - 1 - and screw to vent - 5 -.

5 - Vent
- Tighten as far as possible