Rear Bench Seat Cover and Cushion

Rear Bench Seat Cover and Cushion





1 - Cushion

2 - Fastening Strips (Qty. 2)

3 - Clamping Strips (Qty. 4)

4 - Cover

• Removing

- Remove the rear bench seat. Refer to => [ Rear Bench Seat ] Rear Seats.

- Separate the clamping strips - 2 - (Qty. 2) in opposite direction from each other.

- Remove fastening strips - 3 - (Qty. 4).

- Cut through wire clips - 5 -.

- Install cover - 4 -.

- Pull the cover -4- upward and cut through the wire clips - 5 - with a knife.

- Remove cushion - 1 -.

• Installing

- Replace the wire clips - 5 -.

- Install cover and cushion in reverse order of removal.

5 - Wire Clips