Lower Oil Pan, Oil Pump Component Overview
Lower Oil Pan, Oil Pump Component Overview
1 Seal
• Replace
2 10 Nm
• Tighten in diagonal sequence in steps
3 Oil pan (lower section)
• Removing and installing, refer to => [ Lower Oil Pan, Removing and Installing ] Lower Oil Pan, Removing and Installing
4 10 Nm
5 Front oil baffle
6 22 Nm
• Replace
7 20 Nm + 90° (1/4 turn) additional turn
• Replace
• during installation, insert new diamond disc => [ (Item 9) Diamond disc ] between drive gear and chain sprocket.
8 Balancing shaft drive gear
• during installation, insert new diamond disc => [ (Item 9) Diamond disc ] between drive gear and chain sprocket.
9 Diamond disc
• Replace
10 Drive chain for oil pump
• Removing and installing, refer to => [ Oil Pump Drive Chain or Chain Tensioner ] Oil Pump Drive Chain or Chain Tensioner
• Drive chain tensioner => [ (Item 16) Chain tensioner ] Upper Oil Pan, Oil Filter, Chain Tensioner Component Overview
11 Drive chain sprocket for oil pump
• Removing and installing, refer to => [ Oil Pump Drive Sprocket ] Oil Pump Drive Sprocket
12 Chain sprocket for oil pump
• Location: text faces toward rear
• during installation, insert new diamond disc => [ (Item 9) Diamond disc ] between drive gear and chain sprocket.
• Removing and installing, refer to => [ Oil Pump, Removing and Installing ] Oil Pump
13 Studs
• Self-locking
• Short threaded side faces cylinder block
14 10 Nm
15 O-ring
• Replace
16 Oil pipe
17 O-rings
• Replace
18 Oil pipe
19 Bracket
• for oil pipe
20 10 Nm
21 O-ring
• Replace
22 Oil pump
• with balancing shaft
• Removing and installing, refer to => [ Oil Pump, Removing and Installing ] Oil Pump
23 Rear oil baffle
24 10 Nm
• Self-locking
• Replace
25 20 Nm +120° (1/3 turn) additional turn
• Replace
• Insert using locking compound; locking compound.
26 Seal
• Replace
27 Oil drain plug - 30 Nm
28 10 Nm
29 Oil Level Thermal Sensor (G266)
Oil spray jet for piston cooling
1. Bolt -10 Nm
2. Oil spray jet for piston cooling