Low Beam Bulb, Through MY 2006

Low Beam Bulb, through MY 2006

Removing





- Remove headlamp, refer to => [ Headlamps, through MY 2006 ].

- Release the spring clip - arrows - and remove the cover from the headlamp housing.

- Disconnect harness connector - 1 - at low beam bulb.





- Disengage the wire clamp - 2 - and remove the bulb - 3 - from the housing.

Installing

Install in reverse order of removal, observing the following:

- Insert bulb in housing, taking care not to touch glass bulb with bare hands.

- Secure bulb with spring clip.

- Re-connect harness connector and close housing cover.

- Secure housing cover using wire clamp.

- Install headlamp.