01V, 5 Speed A/T

Fig. 18 Multi-Function Transmission Range (TR) Switch -F125- - 01V, 5 Speed A/T

Component location: The Multi-Function Transmission Range (TR) Switch is located on the left side of the transmission, harness connector for Multi-Function Transmission Range (TR) Switch -arrow-





Fig. 19 Tiptronic Switch -F189-

Component location: The Tiptronic Switch is integrated into the circuit board for the icon insert which is located in the cover for the shift control mechanism.

It consists of 3 Hall sensors (A, B, C), which are energized by a solenoid on the transverse slide on the roll cover

A - Downshift switch sensor

B - Tiptronic recognition sensor

C - Upshift switch sensor

- If malfunctions occur test Tiptronic Switch in the Measured Value Block.





In the event of malfunctions, first check whether the solenoid is properly attached to the roll cover -C- transverse slide, if necessary replace transverse slide. The icon insert with the integrated circuit board must not be replaced until the wiring connections have been inspected. In the case of vehicles with multi-function steering wheel, the buttons on the steering wheel and their wiring must also be inspected.